Select your site:
International
Contact Us
From single dwellings to multi residential towers, DGL Powder Coatings provide you with the confidence and quality that will make it all worthwhile.
Residential projects can range from single dwelling homes through to multi-residential units, apartments, flats, and townhouses. It is important to define your project correctly to ensure the correct product is specified and the performance and warranty is able to be gained for your project.
To help in this process we utilise:
1. The building classifications under the Building code of Australia (BCA).
2. Industry standards for powder coatings
The following tables detail the BCA classes, building examples in those classes, and the industry standards that a product should meet to be suitable.
Use this information as a guide to identifying your project and the choice of product that you have, including exterior and interior applications.
* DGL products that meet just AAMA 2603 and AS3715 are supported for DGL Alumi Shield warranties on interior applications only on residential projects greater than 3 level when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions
The following table can be used to help identify the product choice you have for the interior use of DGL Premium Powder coatings on your residential project.
● Alumi Shield warranties are available when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
Non-warrantable
All DGL powder products are NOT suitable in strongly acidic or caustic environments so PH must be >5 and <9.
For any interior application of powder coating close to liquids, eg swimming pools, fountains, bathrooms, sinks etc please refer to the guidance below for your product options for your project.
1Please note chemically treated water includes antimicrobial treatments, e.g. in pools, anti-corrosive chemicals, and soapy water in bathrooms and showers.
■ Where indicated Alumi Shield™ Warranties are available on areas >than 2m from the liquid (ie outside the splash zone).
● Where indicated Alumi Shield™ warranties are available any distance from the liquid.
Alumi Shield™ Warranties are only available when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
All DGL powder products are NOT suitable in strongly acidic or caustic environments so PH must be >5 and <9.
Alumi Shield™ warranties are not available if the powder coating is immersed in any liquid.
The following table can be used to help identify your residential project and the ultimately the product choice you have.
● Alumi Shield warranties are available when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
All DGL powder products are NOT suitable in strongly acidic or caustic environments so PH must be >5 and <9.
1. Fluoroset may be suitable in locations <10m from the high tide line e.g. harbours (contact DGL for advice).
2. Electro and Duratec are only suitable for coastal environments >10m from the high tide.
For buildings that have exterior powder coated assets close to liquids other than the sea, e.g. outdoor swimming pools, fountains, outdoor bathrooms etc., please refer to the guidance below to understand your product choice and the warranty limitations in these environments.
1Please note chemically treated water includes antimicrobial treatments, e.g. in pools, anti-corrosive chemicals, and soapy water in bathrooms and showers.
■ Where indicated Alumi Shield™ warranties are available on areas >than 2m from the liquid (ie outside the splash zone).
● Where indicated Alumi Shield™ warranties are available any distance from the liquid.
Alumi Shield™ warranties are only available when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
All DGL powder products are NOT suitable in strongly acidic or caustic environments so PH must be >5 and <9.
Alumi Shield™ warranties are not available if the powder coating is immersed in any liquid.
