Select your site:
International
Contact Us
Whether you have furniture, casings, racking, shop fittings, signage, components, equipment, transportation components or fencing, DGL Powder Coatings provide you with the confidence and quality that will make it all worthwhile.
Non-habitable projects are those items that are not dwelling types. Examples can be furniture, bus shelters, statues, signage through to industrial items such as appliances, components and fittings, automotive components, equipment eg. lawn mowers, public transportation.
One of the largest categories is furniture which can include cabinets, racking, lockers, tables and chairs for offices, retail and exhibitions. These are all items that are not attached to a building and so not covered by the residential or commercial categories. To help in this process we utilise:
1. Industry standards for powder coatings
2. Environmental condition utilising AS4312 as a guide
*DGL products that meet AAMA 2603, 2604, 2605 and AS3715 are supported for DGL Alumi Shield warranties on interior and exterior applications when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
The following table can be used to help identify the product choice you have for the interior use of DGL Premium Powder coatings on your non-habitable project.
● Alumi Shield warranties are available when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
Non-warrantable
All DGL powder products are NOT suitable in strongly acidic or caustic environments so PH must be >5 and <9.
* Conditions reference AS4312 and ISO12944 Atmospheric corrosivity zones in Australia to define the environmental conditions and product is suitable for.
For any interior application of powder coating on non-habitable projects close to liquids, eg furniture, racking etc please refer to the guidance below for your product options for your project.
1Please note chemically treated water includes antimicrobial treatments, e.g. in pools, anti-corrosive chemicals, and soapy water in bathrooms and showers.
■ Where indicated Alumi Shield™ Warranties are available on areas >than 2m from the liquid (ie outside the splash zone).
● Where indicated Alumi Shield™ warranties are available any distance from the liquid.
Alumi Shield™ Warranties are only available when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
All DGL powder products are NOT suitable in strongly acidic or caustic environments so PH must be >5 and <9.
Alumi Shield™ warranties are not available if the powder coating is immersed in any liquid.
The following table can be used to help identify the product choice you have for the exterior use of DGL Premium Powder coatings on your non-habitable project. If you have any doubt always check your specification first by contacting our Advice Team.
Non-warrantable
All DGL powder products are NOT suitable in strongly acidic or caustic environments so PH must be >5 and <9.
1. Fluoroset may be suitable in locations <10m from the high tide line e.g. harbours (contact DGL for advice).
2. Electro and Duratec are only suitable for coastal environments >10m from the high tide.
* Conditions reference AS4312 and ISO12944 Atmospheric corrosivity zones in Australia to define the environmental conditions and product is suitable for.
For any interior application of powder coating on non-habitable projects that are close to liquids other than the sea, eg fences near outdoor swimming pools, fountains, outdoor furniture etc please refer to the guidance below for your product options for your project.
